Election 2024: What it means for the energy industry and clients

 

By Jason Utton

As the 2024 presidential election approaches, the energy industry faces a period of uncertainty, with the outcome poised to shape the future of domestic energy policy and international relations. Whether the next administration prioritizes renewable energy, fossil fuels, or energy infrastructure, its decisions will have profound implications for the industry’s direction and the country’s role in the global energy landscape.

Possible impacts to fossil fuels and deregulation

The speed and direction of the energy industry will depend heavily on the election’s outcome. If Donald Trump is re-elected, expect a shift toward policies that favor fossil fuels, deregulation, and a focus on U.S. energy independence. Trump has been a vocal critic of climate initiatives and would likely pull the U.S. out of the Paris Agreement once again, while also aiming to reverse efforts like the Securities and Exchange Commission’s (SEC) push for corporate climate risk reporting. His administration would likely backtrack on domestic climate goals, prioritizing economic growth over emissions reductions.

A key pillar of Trump’s energy plan would be to expand drilling locations for natural gas on federal land and lift restrictions on liquefied natural gas (LNG) exports. He is also expected to pursue heavy tariffs on imports, particularly energy-related imports, which could trigger a trade war with key international partners. While such tariffs could boost domestic production, they also pose risks of increasing consumer costs and long-term volatility, particularly if major energy exporters retaliate.

Despite Trump’s ambitions to reshape energy policy, any substantial legislative changes would require bipartisan support. Divided government remains the most likely scenario, with projections showing the GOP likely to benefit from a favorable 2024 Senate map, while Democrats are expected to regain a narrow majority in the House. Even if Republicans secure control of Congress, sweeping changes – like a full rollback of the Inflation Reduction Act (IRA) –would be difficult to achieve without cross-party compromise due to the slim governing margins.

The Inflation Reduction Act: Strong bipartisan roots

Certain provisions within the IRA, such as tax credits for carbon capture and storage (45Q), hydrogen production (45V), clean fuel production (45Z), and manufacturing incentives (45X and 48C), have bipartisan support, particularly in rural and industrial communities. For example, most wind farms and solar facilities are in Republican-leaning rural districts, where these initiatives have created jobs and economic benefits. These factors make a complete repeal of the IRA unlikely, even under a second Trump administration.

If Kamala Harris is elected, her administration would likely continue the current trajectory set by the Biden administration, focusing on expanding clean energy initiatives and strengthening the implementation of the IRA. The Harris administration would prioritize distributing IRA funds to local communities, supporting renewable energy projects, and promoting grid modernization. However, even if Democrats win a governing trifecta, enacting sweeping changes requiring congressional action would likely result from intraparty compromises.

In contrast, a Trump administration would focus on leveraging domestic energy resources, such as expanding drilling and natural gas production, while also emphasizing trade policies that protect U.S. energy industries. This approach could create tension with global trade partners, potentially limiting international energy cooperation, but it would prioritize the expansion of U.S. energy dominance. Balancing these domestic opportunities with the risk of international isolationism would be a central challenge for a second Trump term.

The role of Congress: Bipartisan challenges ahead

Regardless of who occupies the White House, the makeup of Congress will play a significant role in in shaping energy policy. Experts believe that policy changes requiring congressional approval will hinge on bipartisan negotiation, driven by narrow governing margins.

One of the most pressing fiscal issues in 2025 will be the expiration of several tax provisions from the 2017 Tax Cuts and Jobs Act (TCJA) – approximately $5 trillion in tax cuts passed by President Trump. Extending these cuts will require substantial revenue offsets, and some lawmakers may argue for repealing portions of the IRA to cover the costs. However, such a move could face strong opposition from both Democrats and Republicans who support the job-creating provisions in the IRA.

As energy infrastructure projects require long-term investments and planning, a cooperative bipartisan approach will be critical to ensure progress continues amid political transitions.

Grid modernization: A shared priority

One area where both parties may find common ground is the need for significant improvements to the nation’s aging power grid. Over 70% of the U.S. grid is older than 25 years old, and as renewable energy projects come online and electricity demands rise, modernizing the grid will be crucial to meeting future energy needs. Upgrades will require building new transmission infrastructure, expanding interconnection capacity, and ensuring that renewable energy can be delivered efficiently to customers.

The growing role of datacenters, artificial intelligence, and advanced manufacturing will further drive electricity demand, adding urgency to the need for a more reliable and resilient grid. Both Republican and Democratic administrations recognize these challenges, and federal support will be essential to streamline permitting processes, fund large-scale infrastructure projects, and ensure grid stability in the years ahead.

Final thoughts

The 2024 presidential election is a key variable in determining the future of U.S. energy policy and its impact on both domestic markets and global geopolitics. Most projections suggest that divided government remains the most likely scenario, with narrow majorities in both the House and Senate. Even if either party gains full control of the government, enacting sweeping changes to federal energy policy will be a challenge due to the complexities of the legislative process.

While the Trump administration would likely prioritize fossil fuel expansion and trade protectionism, and the Harris administration would focus on continuing clean energy investments, one thing is certain: energy policy will remain a central issue in U.S. political discourse. Regardless of which administration is in power, renewables and energy storage are expected to dominate the energy transition due to their lower costs and faster speed to market, positioning the U.S. as a leader in the global energy transformation.

About the Author

Jason Utton

Senior Vice President

Senior Vice President of Atwell’s Power Group, Jason Utton has been developing renewable energy projects for more than 17 years, with experience in wind, solar, and battery storage projects across the country. He currently provides large scale investment and development clients with business goal setting, renewable portfolio optimization, and capital deployment strategies.

3 considerations when looking for the right Land and Title partner

Identifying and purchasing the right parcel of land for a project can be the difference between a successful project or a drawn-out headache. When looking for and identifying a parcel of land to develop, there are several questions clients should ask themselves. For example: Who owns the land? Are there any additional burdens and/or encumbrances that will negatively affect the project, and can they be resolved? As a project developer, you may have an answer for the first question, but what about the second? Having the right Title Research, Land, and Right of Way team on the project is crucial for thoroughly reviewing the title and minimizing risks, while still being able to offer cost-effective solutions.

It’s critical for project success that thorough land title research is completed to provide holistic awareness and complete project risk understanding. Once thoroughly completed, it is imperative that this is effectively communicated to all parties involved. Here are three considerations when looking for your next title work partner:

 

1. Will the title work be completed by the contracted land team or with a third-party land service company?  

There are numerous benefits to partnering with a company offering full title research solutions from the project initiation. These benefits include lower project costs, shorter timelines for stages of completion, and earlier initiation of work. Whether it’s a surface title or mineral title, our team of experts at Atwell hits the ground running so you get results that are faster and more effective.

2. How many parties will be involved in communication?

Effective and thorough communication drives schedules and efficiencies of a project. When working with a company that provides full field services for a project—such as title services and land survey—there is true value in the reduced need for additional communication. When there are fewer voices involved in decision-making and movement, the project will simply move faster.

When title work is completed by the Atwell Land Solutions team, the client receives consistency and efficiency across departments as a byproduct of effective and timely communication. Any issues that may arise are identified and resolved immediately amongst team members, as opposed to traditional scenarios where questions or issues are addressed through lengthy email chains between third party land service company and the project team.

A critical component of a project is landowner engagement. Understanding and communicating landowner concerns or restrictions is a must for all field activities. The key goal with effective communication is to minimize progress delays and eliminate any landowner issues.

3. Who is identifying critical issues and solving them?

As a development project starts in the entitlement process, often times the client is not aware of any potential land encumbrances that may affect the project. Identifying these critical issues early in the project is imperative. Issues such as understanding the chain of title history, potential land restrictions, identifying underground encumbrances, and other interests that are tied to the piece of land in development are essential to understand early in the entitlement process. Atwell’s Title team has the knowledge and experience to identify these potential issues and communicate effectively to the client, the landowner, and the project team during the entitlement process.

Certain mortgages may also have language that prevents work from happening to the surface. Many components of that mortgage may need to be picked apart for language that could prevent the development. This is a task for someone experienced in the matter. Atwell has deep experience doing this exact type of work to ensure we catch this language early in the process and assist in accomplishing client goals.

Our Land and Title teams kick off the work for the rest of our services. When Land gets involved, the lifeline of the process is initiated, and the concerns of the owner are at the forefront. The team can identify what areas to avoid and why, while helping clients understand and determine what areas of the property to pay special attention to.

 

At Atwell, we build strong relationships with owners, so they know who to call with questions and who to expect during those early mornings on their property. We respect our clients and the owners, and foster environments of mutual respect for all employees on the job. This is key for all our projects and is not an initiative we take lightly. Success is built on relationship longevity, and that relationship begins at the title work.

Utilizing Atwell’s subject matter experts in title work has several benefits: We have closed circuit communication, expert knowledge and experience, a passion for developing relationships, and cost-effective strategies that benefit our clients’ goals. Be it surface title or mineral title; we have the capabilities to jump start your project and get the ball rolling so you know things are already in motion before the survey team even arrives on site.

A successful solar program: How Atwell’s Land Solutions Team helped DTE Energy reach its solar acreage goals

 

Increasing the resiliency of the energy grid is a core infrastructure challenge across the United States. Not only is there a need to withstand and rapidly recover from increasingly threatening extreme weather events, but resilience improvements also support the transition to a more sustainable system, fostering environmental sustainability and combating climate change.

DTE Energy, a leader in energy infrastructure transformation, is building a cleaner, more reliable, and affordable energy grid. The company has spent more than $5 billion on the electrical grid over the last five years – trimming trees, strengthening infrastructure, rebuilding significant portions of the grid, and replacing aging equipment. DTE is also rebuilding the way it generates energy, including investing billions of dollars in solar and wind energy.

A successful solar program starts with land. In 2023, Atwell’s Land Solutions Team supported DTE in reaching its solar acreage goals, which helped the company meet its solar energy goals.

A program management approach to solar program success

Reaching DTE’s progressive goals required a collaborative partner throughout the development process who shares a vision for efficient, clean energy sources. By harnessing the power across Atwell’s land solutions, development, survey, environmental, payments, documents, project management, and leadership teams, Atwell’s program management approach helped DTE to not only meet but exceed its solar acreage goals in one year. There were four key components that led to this success:

  1. Meeting acreage goals: 2023 proved to be an incredible year in the successes of both DTE and Atwell by hitting weekly solar acreage goals 50 out of 52 weeks and finishing the year at 128% of goal. Atwell and DTE share a commitment to expanding solar infrastructure and reducing carbon emissions.
  2. Using a program management approach for efficiency: By harnessing the power of coordinated teamwork within Atwell’s teams (development, survey, environmental, payments, documents, and project management), the Land Team met the extremely challenging task of reaching its solar acreage goals, contributing to DTE’s leadership position in the renewable energy sector.
  3. Staying within budget: Fiscal responsibility played a crucial role in the solar success story. By implementing strategic cost-saving measures, negotiating favorable contracts, and leveraging operational efficiencies, the land team at Atwell maximized the impact of their budget. This financial discipline ensures that every dollar invested by DTE contributes effectively to the success of its solar initiative.
  4. Embracing DTE’s vision: By actively participating in and contributing to DTE’s solar initiative, Atwell is not only supporting environmental sustainability but also advancing the collective effort to combat climate change. DTE’s vision is unlike any other in its aggressive approach, but it’s this passion for cleaner energy that motivates the team at Atwell to move just as quickly. This shared goal underscores the importance of collaboration between industry leaders to address the challenges of our changing climate.

DTE is leading the industry in creating lasting change that will benefit their clients of today and tomorrow. As a key partner, the Atwell team is looking forward to supporting DTE’s 2024 goals.

 

Aerial mapping paired with in-house survey services leads to better data, increased efficiency, and expanded possibilities

 

The accelerated progress of a 4,000-acre solar farm development in southern Illinois was due in large part to Atwell’s survey team in its Naperville, IL office. By incorporating various aerial mapping tools into their surveying and project management process, the team was able to efficiently and safely deliver successful outcomes to the client.

What does aerial mapping accomplish?

Atwell utilizes drone-based LiDAR (Light Detection and Ranging) and photogrammetry payloads to provide accurate and efficient surveying. These technologies allow our surveyors to map large areas and access hard-to-reach or dangerous areas quickly and safely. Atwell strives to be a leader in these technologies as we analyze how they can benefit our clients and meet increased demands for these services.

The benefits of aerial mapping

Aerial mapping provides a number of benefits to clients for their projects. Because the drones are able to survey a wider scope of land, including hard-to-reach or dangerous areas, mapping can be completed more safely and efficiently. There is also little to no interference with highways, train tracks, or other transportation sites. Team members can do their work from a safe distance in a fraction of the time with more accurate data. For a 4,000-acre project like this one, saving time in an effective and safe way has a significant impact on the timeline and a successful outcome.

For a solar farm, aerial mapping allows surveyors to more accurately determine how suitable a site is and how to more effectively plan for the overall development. The slope of the land is important for determining the maximum amount of sunlight that solar panels can capture, and unobstructed views and paths are also vital for solar panel operation. The drones are able to pinpoint all of the necessary information for the surveying team to understand the land and topography better. Data acquired from aerial mapping is not only more precise, but it produces higher quality imagery. With aerial mapping, a number of deliverables are available, from orthomosaic maps to digital surface models (DSMs) to contour line mapping.

Finally, aerial mapping is not only useful for renewable energy projects. It can be applied to all of the markets that Atwell serves: real estate and land development, oil and gas, and power and renewable energy. We can provide clients with an extra layer of confidence that their projects will be completed as precisely, promptly, and safely as possible.

Realizing the potential of aerial mapping services

Tori Aper, a Project Surveyor at Atwell, knew of another land surveyor with decades of experience and a professional emphasis on geospatial technologies, including aerial systems. That person happened to be her husband, Kurt Aper. With Kurt’s expertise, the team was able to build and strengthen Atwell’s aerial mapping services and successfully execute Atwell’s largest geospatial surveying project to date.

According to Tom Bartosik, Project Manager, this solar farm project was one that would usually have the support of subcontractors; however, the team completed everything in-house. Kurt’s extensive knowledge in the subject contributed to Atwell’s ability to use aerial mapping as a way to increase efficiency and safety for the team and the client.

Considerations when aerial mapping: climate, equipment, and time

Field verification of the quality of the LiDAR data is critical to a project’s success, including this one, enabling the team to catch and correct issues and adjust flight parameters while still on site. The site’s remote nature and large size made it necessary to use a portable generator so that drone batteries could be charged on-site, allowing almost continuous flights. Finally, weather is an important factor in using aerial mapping strategically. This particular solar project development took place in December. The frigid temperatures, various precipitation, and wind often made flying difficult.

Planning and processes for effective aerial mapping

Flying a large site like this, where one would usually subcontract traditional airplane-based mapping service, requires forethought and preparation. The team relied heavily on thorough pre-flight planning.

“We needed comprehensive planning of ground control targets and flight areas to make field work efficient,” explained Kurt. “I chose the initial ground control points (GCPs) and relied on my team to continue the process.”

Pete Roberton, Survey Crew Chief, led those efforts. After setting the 30 GCPs in locations that Kurt had chosen, he continued with section and boundary recon. All the GCPs were about 1,800 feet apart, sitting on or adjacent to roadway, which made the process immensely easier.

“I would set the GCPs at the southwest end of the site first,” Roberton explained. “As soon as I completed an area large enough to begin flying the drone, Kurt would send the drone up. I was able to complete all the GCPs in one day and spent the following days searching for section and boundary corners while aiding Kurt as a visual observer for the longer flight lines.” The duo spent about three-and-a-half days on the 4,000-acre site.

Processing and extracting aerial data

When it was time to process and extract the aerial data, Tori Aper led the way. After processing the LiDAR data, ground features were extracted from the point cloud to be brought into the topographic base map. The topography varied greatly, with bank cuts for roads and bank tops for the streams and ditches, so maintaining the tops and bottoms of banks was crucial in extracting accurate points for the surface tin. Flying with LiDAR allowed the project surveyor to ascertain the centerline of streams and ditches, even in forested areas.

“If the area was too obscure in the point cloud, I had a crisp photo of the entire area to fall back on to see what was taking place, thanks to the photogrammetry,” explained Tori Aper. “I could then pull data from the point cloud for all the line work and ground elevation points, which were brought into CAD for the topographic base map and eventual surface creation.”

An example of an image captured via photogrammetry.

A point cloud sample.

The team’s mapping was executed with impeccable skill and the entire site was flown in just a few days. The mapping was then processed the following week, saving Atwell and the client several weeks of time and resources.

“We’ve been able to hone our skills and confidently offer this service with our other projects.” Bartosik noted. “At Atwell, whether it is surveying or mapping services, engineering design or environmental services, we are truly one company with numerous solutions!”

The benefits of electrification in the oil and gas industry

The oil and gas industry in the United States relies on the generation of onsite electrification using diesel or natural gas to power facilities and well pads. Despite this need, there is not always enough electrical infrastructure in rural areas to meet the demand, so generators are used to run some components of a typical well pad. These combustion engines are powered by diesel and natural gas, which tend to be reliant on older technology and mechanics that fail to match the uptime and reliability of electrified well pads located close to power sources.

Electrification has many benefits, including reduced emissions and reduced maintenance. Atwell has been working with clients to electrify well pads and pull power from the grid to increase uptime and replace the older equipment.

Realizing the power and potential of electrification in the oil and gas industry

Several years ago, Jake Kapp, Senior Project Manager at Atwell, was asked to develop a field-wide gathering system for a project. Knowing the client was reliant on electrification for their entire field, Kapp tapped into his experience in oil and gas gathering systems. He ensured that the land and survey were acquired right away for power lines and compressor stations, which would then become entirely electric.

Similarly, Kapp managed another project that involved nearly tripling the capacity of an existing 140 MMSCFD compressor station.  The scope was to add new electric powered units, as the existing station was operating natural gas-powered compression units. The station was successfully converted to electric compressors and added 260 MMSCFD throughput for a total of 400 MMSCFD without any additional emissions.

The success of these two projects opened Kapp’s eyes to the potential of electrification and the future of the oil and gas industry. It has also resulted in Atwell putting even more attention and effort into advancing its electrification capabilities.

“In my opinion, this is the wave of the future from a reliability and runtime standpoint,” said Kapp. “The simple fact of electrification is that it will reduce emissions and required maintenance. The electric motor is much more direct and straightforward than that of an internal combustion engine.”

The initial innovation shown in Kapp’s work led other clients to express interest and seek Atwell’s electrification expertise for their projects. “This isn’t a one-time project,” Kapp explained. “We’re seeing this movement across the nation, and we can support our clients on a national level across industries. Be it wind, solar, or gas, electrification can be a game changer and we can meet client needs in all areas.”

Serving clients and various markets with electrification

From an electrical delivery standpoint, there is nothing Atwell does not touch. For example, we can design a power generation site, from wind or solar, and deliver that power to a substation or existing transmission line. From there, we have the design and engineering capabilities to deliver distribution power to a well pad and supply power to all of the equipment, should a client choose to do so. It is because of our vast capabilities and national presence that we know the electrification program can meet the needs of each industry we serve.

“We understand that some companies are hesitant to jump in entirely, so we’re happy to use the expertise and experience we’ve gained in this area to consult on projects,” Kapp said. “We can even support smaller projects like a power study, or taking a look at older systems and evaluating whether an updated or new system entirely would be best for the client.”

For example, Atwell has done previous overhead power line projects with oil and gas companies. For one project, Atwell delivered electricity to an existing well pad so a new well could be drilled and the completion of a two-week frac project could be reached, otherwise known as an E-Drill and E-Frac. Using electricity, the runtime is higher so there is less maintenance and the are no emissions from equipment.

Atwell worked with the client from beginning of the design phase for the overhead power system project so the E-Drill and the E-Frac equipment could be removed after the work was complete. The new well pad then had power for basic operations without having to shut down the power line.

Because of the breadth of services offered by Atwell, clients can rely on us to take them from title work and surveying through the final stages of a project.

The expected growth and demand for electrification in the industry

In just a few years, Kapp has seen the number of clients interested in electrification grow, along with his ability to act as a translator across skillsets.

“This opportunity grabbed my attention and sparked my interest because it is a presently underdeveloped niche,” said Kapp. “I’ve always been interested in how electricity gets delivered and many oil and gas companies are working in the middle of nowhere, where the electrical infrastructure just isn’t in place. I’ve been able to assess what’s needed from that electrical standpoint and speak to the client about what is needed from a time and cost perspective. I get particularly excited when I’m presented with a problem and the solution is within our capabilities. Electrification is one of those solutions.”

Atwell’s team of passionate and knowledgeable subject matter experts is the reason why we are able to provide innovative solutions like electrification. As the world becomes more conscious of the way we consume and emit energy, Atwell is excited and proud to be developing an electrification campaign that will not only help our clients, but our global environment as well.

Unleashing the power of wind: Comparing the advantages of an 80/20 repower vs. a full repower

By: Jason Utton and Courtney Schmidt

Wind energy has long been celebrated for its clean, consistent, and cost-effective nature. As wind energy facilities age, many owners are beginning to explore the benefits of upgrading their turbines and equipment. The Inflation Reduction Act (IRA) has further incentivized these upgrades, making now an ideal time to consider your repower options.

According to S&P Global, over 48 gigawatts (GW) of operational wind power capacity are prime repower candidates based on advanced age. Among this group, 21 GW of older wind farms have been consistently underperforming, with annual capacity factors below the state averages for five consecutive years. Additionally, 2.6 GW of generation has experienced declining annual capacity factors over the same period.​

Presently, S&P indicates that around 16 GW of wind capacity has been repowered or is in the process of repowering. This trend is expected to steadily increase month over month, especially in states leading the charge in renewable energy refurbishment. Financial considerations such as tax credits, PPA negotiations, and changes in utility rates play a significant role in decision-making. We’ll walk you through the advantages of both an 80/20 repower and a full repower in this blog.

 

The 80/20 repower: Boosting efficiency with minimal disruption

An 80/20 repower involves replacing critical components of the wind turbine, such as blades and gearboxes, while retaining portions of the existing infrastructure. This approach is cost-effective and less disruptive than a full repower, offering a significant increase in efficiency and performance without the need for a completely new development. To qualify, the cost of new equipment must be at least 80% of the total value of both the new and remaining equipment combined.

Repower developers benefit from the known wind resource and renewed tax incentives that lower the capital cost, making them more economically feasible. Federal tax incentives include production tax credits (PTC), which provide a 10-year tax credit for each kilowatt-hour of electricity produced, and investment tax credits (ITC), which provide a one-time tax credit based on the capital investment made. The improved tax incentives make repowering an attractive option for many project owners, promoting the sustainable growth of the renewable energy sector.

80/20 repower advantages include:

  • Cost savings: By retaining most of the existing infrastructure, the costs associated with new foundations and extensive construction are minimized.
  • Time efficiency: Upgrading key components is quicker than developing a new site from scratch, reducing downtime, and allowing for faster realization of increased energy output.
  • Increased output: Modern turbine technology can significantly boost energy production, leveraging advancements in blade design and aerodynamics.

 

Atwell’s expertise in 80/20 repower projects

Atwell’s team specializes in providing a seamless, coordinated approach to wind repower projects. With over 500 wind projects and more than 20 GW of experience across the United States and Canada, our expertise ensures compliance with environmental regulations, effective landowner engagement, and precise engineering and survey review.

Our comprehensive services include:

  • Environmental compliance and permitting: We ensure all necessary studies and permits are in place, maintaining strict adherence to environmental regulations. The team also ensures all necessary permits are obtained in the most cost-efficient manner.
  • Land services: We facilitate lease amendments and waivers, ensuring a smooth progression of the repower project.
  • Engineering services: From road engineering to structural analysis, we optimize project design and performance.
  • Survey services: Updated ALTA and topographic surveys provide the precise site data essential for planning and development.

 

The full repower: Reimagining wind energy from the ground up

A full repower involves replacing nearly all components of a wind farm–turbine (including foundations), towers, and underground electrical systems–to maximize energy output and integrate the latest technological advancements. This upgrade is best for older projects where structural integrity, efficiency, and reliability have declined due to wear and outdated technology. Modern turbines offer enhanced blade designs, improved materials, advanced control systems, and increased hub heights, significantly boosting performance and reducing maintenance costs.

Full repower advantages include:

  • Maximized energy production: By replacing all major components, a full repower utilizes the latest technology to achieve the highest possible energy output.
  • Extended lifespan: New components come with extended warranties and longer operational life, providing a reliable energy source for decades.
  • Future-proofing: A full repower prepares the wind farm for future advancements and grid requirements, ensuring long-term viability.

 

Atwell’s full repower expertise

With extensive experience managing over 1,100 megawatts of repower projects across key states like Maryland, Michigan, Missouri, North Dakota, and South Dakota, Atwell brings unparalleled expertise to full repower projects. Our comprehensive approach ensures meticulous planning and expert execution across all critical stages.

Our full repower services include:

  • Thorough desktop reviews: Using GIS technology, we analyze existing infrastructure, proposed routes, and project areas.
  • Asset valuation and analysis: We provide robust support throughout the analysis phase, ensuring accurate asset valuation.
  • Environmental and permitting services: From field reconnaissance to wildlife conservation strategies, we handle all permitting requirements.
  • Real estate services: Our team navigates agreements, conducts deed research, and facilitates necessary waivers and amendments.
  • Engineering and mapping: We provide aerial mapping and create detailed Request for Proposal (RFP) documents tailored to each project’s specifications.

 

Generating efficiency with streamlined planning and expertise

Embarking on a wind repower project, whether an 80/20 repower or a full repower, requires meticulous planning and coordination. Atwell’s national team and strong program management framework ensure each step is completed according to the development plan. Our centralized documentation and forward-looking conservation and development resources provide our clients with a comprehensive solution that maximizes return on investment.

By partnering with Atwell, you gain access to a wealth of experience and a dedicated team that delivers the greatest possible return on your wind energy investment. Ready to harness the full potential of your wind energy facility? Let Atwell guide you through your wind repower journey with expertise and efficiency.

About the Author

Jason Utton

Senior Vice President

Senior Vice President of Atwell’s Power Group, Jason Utton has been developing renewable energy projects for more than 17 years, with experience in wind, solar, and battery storage projects across the country. He currently provides large scale investment and development clients with business goal setting, renewable portfolio optimization, and capital deployment strategies.

About the Author

Courtney Schmidt

Vice President

Courtney has managed and provided technical expertise to programmatic efforts across the country for over 22 years. She has passion and experience in building teams across geographies and disciplines, siting facilities, and managing development and operations activities for clients.

Wind repowering: Working with a seamless team sets up savings and success into the future

By: Courtney Schmidt, Senior Director

Leonard Powell, Associate Director

David Greer, Project Manager

 

The advantages of wind are well established in that it offers a clean, consistent, and cost-effective source of renewable energy. Many wind energy facility owners are realizing turbines and equipment are now aging since their initial development, and the added incentives offered by the Inflation Reduction Act (IRA) provide a timely driver of change. By replacing the turbines and blades through a wind repower, there is significant potential for increased output and continued performance without the full development process of a new site.

Beyond the direct value delivered with greater efficiency and performance, Atwell has guided clients through the development process providing, a comprehensive range of services in a simplified, coordinated manner. Our team specializes in providing a complete development solution, ensuring compliance with all relevant environmental regulations, landowner engagement to secure new entitlements, engineering, and survey review of repower plans and work with local authorities and communities to address any questions while meeting project goals from concept to completion.

Upgrades today can offer long-term benefits for owners

Wind repowers are a large focus today given the extension of the renewable electricity production tax credit (PTC). Repower opportunities include tax incentives, capitalizing on fossil fuel retirements, and delaying new generation with increased yield through repower technological advancements. Tax credit qualification, Power Purchase Agreement (PPA) negotiations, and utility rate cases play a significant role in decision-making, alongside technical factors like component compatibility and extreme weather events. Interconnection and permitting can impact project timelines and costs.

Atwell brings extensive expertise to repower projects across multiple service groups. With more than 500 wind projects completed, totaling more than 20 gigawatts throughout the United States and Canada, our development experience is unparalleled. In the realm of repower projects, we’ve successfully managed over 1,100 megawatts across key states including Maryland, Michigan, Missouri, North Dakota, and South Dakota.

Our suite of services caters specifically to the needs of repower initiatives. From program and development services providing expert guidance, to land services facilitating lease amendments and waivers, we ensure smooth project progression.

Our environmental services encompass studies, permitting, and comprehensive environmental support to maintain compliance. Engineering services, including road engineering, structural analysis, and owners engineering, optimize project design and performance. Finally, our survey services, offering updated ALTA and topo surveys, provide precise site data essential for project planning and development. Atwell stands as a trusted partner, delivering comprehensive solutions for successful repower endeavors.

What to expect?

Embarking on a wind repower project requires meticulous planning and expert execution across various critical stages. Atwell’s process begins with a thorough desktop review, focusing keenly on existing infrastructure, proposed routes, and project areas, all analyzed with the aid of GIS technology. Following this, our team assists in asset valuation, providing robust support throughout the analysis phase. With a Program Manager at the helm, communication remains seamless, schedules are managed, and quality performance is ensured.

Environmental and permitting considerations are paramount in our approach, covering everything from field reconnaissance and wildlife conservation strategies to sound level and shadow flicker modeling. Atwell handles all permitting requirements, guiding you through the application process. In the realm of real estate, our Land Services Associates and Project Managers navigate agreements, conduct thorough deed research, and facilitate necessary waivers and amendments.

Engineering evaluations, aerial mapping, and the creation of detailed Request for Proposal (RFP) documents tailored to each project’s unique specifications round out our comprehensive suite of services.

Generating efficiency with streamlined planning and expertise

With the wide array of efforts required in a wind repower project, it can be a challenge to bring together and coordinate the planning and execution. While many firms can successfully execute pieces of an effort, the risk of singular focus on their own tasks creates puts the project in jeopardy when important details fall through the cracks.

Atwell leverages our national team experience within a strong program management framework to ensure that each step is completed according to the development plan. We go beyond the foundational deliverable needs to support our clients by ensuring that documentation is centralized and completed in a way that allows clients to meet any current requirements and leverage the work done as a forward-looking conservation and development resource. Atwell has guided its clients through the repower development process, offering a comprehensive range of services and programmatic support tailored to their unique needs and project requirements.

This type of value-add approach is just one way that we partner with our clients to deliver the greatest possible return on investment.

About the Author

Courtney Schmidt

Vice President

Courtney has managed and provided technical expertise to programmatic efforts across the country for over 22 years. She has passion and experience in building teams across geographies and disciplines, siting facilities, and managing development and operations activities for clients.

A framework for success: How stakeholder engagement reduces risks and connects community opportunities

 

Have you been surprised by stakeholder feedback on a project that wasn’t anticipated? Did it impact your schedule or scope? Did it challenge your overall project budget? Maybe your project couldn’t move forward as planned.

Whether it’s community input to make a more informed design decision or setting up a framework for stakeholders to engage on a controversial plan, we creatively design and deliver custom stakeholder engagement plans for your projects and programs.

Danielle Peoples, Project Director, Communications & Stakeholder Engagement at Atwell, has observed a growing demand and interest in developing community benefits for projects across the industry over the past 13 years.

“Communities, individuals, and organizations have important perspectives and experiences to capture in designing the best possible solutions. We know that taking time to research and listen to feedback on potential hurdles or barriers and then developing creative options that can reduce risk, streamline projects, and increase involvement is helping our clients and the communities they’re working within feel more satisfied,” said Peoples.

One of the primary advantages of proactively engaging and understanding the communities we’re working in is risk management. Rather than advancing a project and making significant commitments only to run into an issue late in the process when adjustments are challenging and costly, adapting project planning to allow for input from stakeholders early offers significant benefits:

1. Deepen understanding of the community and its needs

With the technology available today, engagement is more effective than ever before. Whether via social media, visual simulations, virtual or in-person meetings, it is now easier to request and listen to community vision and work to find commonalities to advance project goals.

2. Initiate and strengthen the discussion

Proactive efforts to communicate the project objectives, impact, and timeline allow developers to be in front of challenges and concerns. By working with the community and communicating early and regularly to let them know of the process, we increase the likelihood of engaging supporters and alleviating concerns of potential detractors.

3. Anticipate local, regional, and national requirements and opportunities

Working with Atwell and our national team of experts brings both local knowledge (regulations, permitting, workforce development and minority business benefits) and deep understanding of state and federal requirements (Inflation Reduction Act and Bipartisan Infrastructure Law funding) allowing our clients to enhance decision making and access funding that drives innovation while mitigating risk.

The ideal time to start planning stakeholder engagement is at the earliest stages of development of a project. When structured as an integral part of the development process, stakeholder engagement can improve the reputation of the developer and project, mitigate risk by understanding how varied scenarios might play out, and reduce costs of the project overall thanks to options presented as part of the process.

“Doing stakeholder engagement should not be viewed as a singular task to be checked off but as an opportunity to offer innovative community benefits that are a win for the development team and the community. If we treat people like we’d like to be treated, the aim is for their thoughts to be valued inclusively,” said Peoples. “When we offer people the involvement to understand our operational project challenges, they may have solutions we hadn’t even imagined.”

To learn more about communications and stakeholder engagement services and Atwell’s client support, contact Danielle Peoples.

About the Author

Danielle Peoples

Project Director for Communications and Stakeholder Engagement

Danielle Peoples is the Project Director for Communications and Stakeholder Engagement. She has more than 13 years of industry experience in strategic engagement, change management, communications, and crisis responses. She is passionate about community engagement and giving back to her community.

Employee Spotlight: Jason Minock, Senior Developer, Renewables

Jason Minock is a Senior Developer working with Atwell’s Renewables teams. Though he’s only held this title for three years, Atwell has been an influential presence throughout his 25-year career. In this Q&A, he shares his career journey, when to walk away from a role, forming meaningful relationships in unlikely places, and the importance of standing firm in your ethics and values.  

Can you describe what you do as a Senior Developer?

I oversee program management for one of Atwell’s largest energy clients. I make sure the client has a designated point of contact to ensure that their questions, concerns, and requests are attended to in a timely manner. I also manage any cross integration that may happen if wind and solar projects overlap geographically. Overall, I’m making sure that our team is hitting our deadlines and that the client’s needs are met.

How long have you been with Atwell?

In this role, just over three years—but actually, my first experience with Atwell was as an intern in grad school. At the time there was an office in Brighton, Michigan that was led by Brian Wenzel [current CEO of Atwell] and included other leaders such as Bill Anderson [current Vice President].

After grad school I worked for a national home builder company for about 16 years, and I once again crossed paths with Atwell as a client. We hired Atwell to do our civil engineering work, and I made even more connections and built more relationships through that experience. The fact that people knew me, my work, and my capabilities played a part in me having the role I have now.

Can you give us more details on your career path?

I went to a small liberal arts college where I got my undergraduate degree in political science. After college, I moved to Alaska and worked for the state government for a few years doing public guardianship work. I then went to graduate school at the University of Michigan and got my Masters of Urban Planning. After my land planning internship with Atwell, I was a Project Manager for a small realty group here in Michigan before going to the national home builder company, where I started as a PM and eventually became the Vice President of the Michigan division. Then I spent about two years as the Vice President of Operation and Development at a local, Michigan-based home builder before joining Atwell in 2021.

What a journey! You have a lot of land planning experience. What attracted you to renewable energy and environmental work?

It was definitely a career shift, but it’s really interesting work. Bill Anderson, who I’ve kept in touch with since I was an intern, let me know about this opportunity and felt I’d be a great fit. I didn’t know much about those markets when I first started—I knew about as much as the average American knows, but it wasn’t my specialty. But Bill was confident that I would catch on, and well, he was right. A lot of my experiences in residential construction and homebuilding transfers to what I’m doing now: helping get projects approved and developed, managing teams, and understanding the client-firm relationship.

What are your thoughts on the renewables market and where it’s headed in the future?

I believe there’s an upward trajectory in the renewables industry. That’s another factor that attracted me to this role. Over the next 10 years, no matter who is in office or what is happening politically, renewable energy is going to be fixture in our lives. So I think we are in a great position as a company to make moves in this market and really grow our renewable energy program.

Have there been any challenging moments in your career? How did you overcome them?

Yes. One of my first jobs out of grad school was working for someone who turned out to be really unethical. It was an eye-opening experience for me that forced me to think about my own ethics and values. And I value doing the right thing, working hard, and being honest.

The most ironic part about this is that I could have been working at Atwell that whole time—I was offered a job at Atwell after my internship, and I turned it down for this other company that ended up being totally unethical! Talk about a big “whoops!” It all worked out in the end though.

What are some other values that have carried you through your career?

Something I always tell my kids is, “You don’t have to be the smartest person in the room, but working hard can make all the difference in the world.” There are other ways to differentiate yourself besides being the smartest person in the room. Your level of commitment, the way you treat others, being a good person—these things get noticed, too, and can be just as effective in advancing your career.

What impact has mentorship had on your career?

I’ve learned that mentors come in all forms; you might be surprised who ends up being a mentor to you. At a previous job, a guy who used to work for me actually became my mentor. He was older than me, and he had a really interesting approach to work and how to handle yourself in the workplace. He gave me tons of great advice, and I still text him all the time. I had a coach in college who mentored me more on life than work. His mantra was, “It’s a great day to be alive.” He was just a really good person and helped me see life in a different way. But my father was definitely my first mentor; he showed me the value of hard work.

Here at Atwell, Tim Jones [Development Manager on the Renewables team] graciously taught me all kinds of things about renewables and helped me adjust to the consulting side of the business. Tracey Dubuque [Vice President] has also been really helpful—I can throw any question at her and she always helps me out.

As far as mentoring others, I didn’t think I was that good at it because I never considered myself a good teacher or trainer. But I’m finding that people don’t always need technical training from a mentor; sometimes it’s just career advice or life advice, and taking the time to discuss those things with them.

What have you enjoyed the most during your time at Atwell?

The culture. I’ve worked for a Fortune 500 company, and while the work was fun, there was a lot of negativity, micromanagement, and fear about making mistakes. I feel like Atwell is a “work hard, play hard” kind of place. When it comes to my team, we all trust each other to do our best and do great work. We get along really well and work well together, which isn’t always easy with a remote team.

What are your future career goals?

I’d love to work on more large programs like I’m doing now, and with a variety of clients. I get to do a little bit of everything with our current client—a bit of environmental work, land work, survey work, and more. I think we’re setting ourselves up for opportunities to duplicate this kind of work with other clients in the future, even if it’s on a smaller scale. I’m looking forward to the unlimited growth of the renewables industry and being able to help a variety of clients in various locations with their own unique needs.

Celebrating National Surveyors Week: An Interview with Senior Director Justin Cecil

In honor of National Surveyors Week, we connected with Senior Director and surveyor Justin Cecil to ask about his career and where he thinks the future of surveying is headed.

How did you become interested in surveying, and what motivated you to pursue it as a career?

My journey into the surveying career was a bit of a winding road. In college, I majored in construction engineering, and surveying was a part of that program. The surveying classes were some of my favorite, we got to map parts of campus, but the coursework was primarily focused on route surveying and topographic surveying.

After college I went to work for Pulte Homes working on the construction side of things. Atwell was a consultant to Pulte, so I got to work with a lot of the engineers and surveyors. That’s where I go to know and work with Matt Bissett (current President at Atwell). I started thinking about wanting a career change, so I met up with Matt and he helped me get into the survey group with Atwell.

After some time working in the field and learning about all the things surveyors do, I decided to go back to school to take some additional survey classes at a local community college so I could learn more about the boundary and law portions of surveying. I really love the variety of work and the history of how it helped develop the country. I’ve been with Atwell for 19 years now and I couldn’t think of anything else I would want to do. It’s a valuable and rewarding position to be in.

Are there any particular areas or types of surveying that you find especially challenging, and how do you overcome those challenges?

Right now, I feel like the biggest challenge is hiring surveyors and growing your team. I don’t think many people know enough about surveying and what a great and important profession it is. Very few places offer a degree specifically in surveying, and there aren’t many opportunities for people to get trained and really learn the profession. I feel it’s on surveyors now to promote and get the word out to help teach the next generation what a survey career really entails.

How do you collaborate with other professionals, such as engineers or architects, to ensure seamless integration of surveying data into larger projects?

We’re involved from the beginning to the end of the project. It’s important for us to set up an initial meeting with the developers, engineers and architects to help build the scope of the project and to understand what it is they are intending to do with the survey. Before engineering anything, we have to map it out and determine property limits and if there are any easements that could potentially cause issues with where they want to build. Once we do the initial survey, they can then begin their project. Once the design is completed, the surveyors work on the platting and any easements required, perform stake-out of the proposed improvements, and at the end of each project, we to go back and do a final survey to make sure everything was constructed per plan and to provide an as-built for project financing.

How has technology, such as GIS (Geographic Information System) or drones, influenced the way you approach surveying projects?

Technology really influences the way we approach projects. GIS is an incredible resource for surveyors. It makes research a lot easier as it shows you parcel information, areal imagery and sometimes contours of the land, need versus having to do a site visit or go the local courthouse to pull a deed or tax map. It’s still important to visit the site to get a feel for what you’re working with, but GIS really helps frame out the property lines and show what type of terrain we’re working with. It’s also helpful in supplying legal descriptions of the property so we know how to handle any of those issues accordingly.

Drones, terrestrial scanning and UAVs also benefit our projects and make our field work more accurate and efficient. We can utilize them to map out certain parts of the project that are more difficult to map conventionally. We’re working on creating a virtual Crew Chief position who can go out with a drone and collect data and be able to analyze it later on.

In what ways do you see the field of surveying evolving in the future, and how do you plan to adapt to these changes?

Scanning and drone technology are definitely the future of mapping. It’s up to us to be able to embrace those tools and use them to make our projects more efficient and to create a more accurate product. It’s still going to be important for us to be able to interpret the data that these technologies provide, so it’s not like these technologies are going to completely replace conventional surveying; there’s still going to be a need for surveyors to accurately measure and interpret the data.

An interesting thing about surveying is that you have to have the ability to read cursive writing, because many of the old records that were taken in the 1700s and 1800s are written in cursive. We’re still relying on those records for some projects, so even though technology has greatly advanced since then, surveyors are still needed to interpret what has been recorded.

What advice would you give to someone considering a career in surveying or just starting out in the field?

I think the best thing you can do is go out in the field and get experience. Work with a survey crew and learn as much as possible to really gain a solid foundation. The most successful surveyors are the ones who have spent time doing it and put in the work. It gives you a chance to see all aspects and learn about the variety of projects you get to work with. Be curious, ask questions, and absorb as much as you can.